Of the two tools in the DCK250QQ2 kit, the DCF845 impact driver is the one that gets picked up first. It is lighter than the DCD806 hammer drill, better balanced, and it goes into places the drill has to be coaxed into: tight framing bays, ceiling work held overhead, the inside of cabinet boxes. After years of DeWalt tools on the same 20V battery platform, this is the one that earns the most hours.
As an Amazon Associate I earn from qualifying purchases. A commission may be earned if you buy through this link, at no extra cost to you.
What the DCF845 is
DeWalt lists the DCF845 with a brushless motor, 1,825 in-lbs of torque, 3,400 RPM, a 3-speed selector, a variable speed trigger, a 1/4 inch quick-connect hex chuck and an integrated 3-LED work light. In the DCK250QQ2 kit it arrives with the DCD806 hammer drill, two 4Ah batteries, a charger, two belt hooks and a contractor bag.
Pro Tool Reviews scored it 9.3 out of 10 and said it beat both the older DCF887 and the compact Atomic DCF850 in its driving and nut-busting tests. The same site lists a 4,200 impacts per minute top rate and a 5.1 inch length.
The label on the driver itself carries the same story: DCF845, XR, brushless. The 4Ah battery sits at the base, and it is the same battery that fits the drill, the saws, the sander and the rest of the tools on the shelf. That shared battery is the reason for staying with one brand.

Why it gets picked up before the drill
The DCD806 stays in hand for drilling. The DCF845 is grabbed the second it is time to drive a fastener. That split has held up job after job: twist bits and hole saws go in the drill, and every screw, bolt and anchor goes through the driver.
Weight explains most of it. The driver is noticeably lighter, and the balance is right where the hand wants it. Held overhead to run screws into a ceiling, it does not pull the wrist down the way a heavier tool does. On a ladder, it rides on the tool belt without feeling bulky or awkwardly weighted, which matters when the other hand is holding the rail.

By the end of a long day the wrist is not worn out. For a tool that gets used for hours of short bursts, that is the feature that counts most.
Power and the three speeds
The DCF845 has never felt underpowered. Long structural screws and heavy timber screws go in without the motor bogging down, and the brushless motor keeps pushing through when the fastener hits dense wood.
Speed 3 is where it stays for everyday driving. Dropping to speed 1 or 2 is for delicate work, like screws into cabinet faces, where a screw head can be overdriven in half a second at full speed. The selector is a small switch that does a lot of work, and it is the difference between a clean cabinet face and a stripped one.
One owner comment under a DCF840 versus DCF845 comparison video describes the same split: position 1 for light-touch fastening, position 3 for the most torque and speed.
What it has driven
Framing screws. Long cabinet screws. Exterior deck fasteners. Lag bolts for mounting outdoor fixtures. The longest fasteners it handled were heavy 3-inch and 4-inch structural screws, sunk deep into dense framing lumber.
That is a wide range for a 1/4 inch impact driver, and it never needed backup. The hammer drill handled the holes, and the driver did the rest. Between the two, a day of framing, cabinet work and fixture mounting gets done with nothing else in the hand.
Lag bolts are the true test for a driver this size. They want torque and patience, and the impacts do the work once the bolt bites. Pressure on the bit has to stay firm, and when it does, the driver keeps going until the fixture is tight.
How it compares with other DeWalt drivers
The DCF845 replaced the DCF887 as DeWalt’s flagship 20V Max XR impact driver. Pro Tool Reviews lists the DCF845 at 3,400 RPM and 4,200 impacts per minute, against 3,250 RPM and 3,600 impacts per minute for the DCF887. Max torque is the same 1,825 in-lbs on both, so the gain is in speed rather than raw twisting force.
The Atomic DCF850 is the compact option, and Pro Tool Reviews still calls it the top choice for the smallest head. Its later roundup of DeWalt drivers names the high-torque DCF860 as the best DeWalt driver overall, which leaves the DCF845 as the value pick in the lineup.
For work around a house, the middle of that range is the right place to be. Framing screws, cabinet screws, deck fasteners and lag bolts all sit comfortably inside what the DCF845 handles. The extra torque of a high-torque model matters for heavy structural work all day, and the smaller Atomic matters for the tightest access. The DCF845 covers the ground between the two.
Impact driver or drill
An impact driver and a drill driver are different tools that look alike. A drill driver spins the bit steadily, and its clutch stops the spin at a set torque. An impact driver adds rapid rotational hits behind the spin once the fastener resists, which is how it sinks long screws and bolts without twisting the wrist.
That is why the work splits so cleanly between the two tools in the kit. Clean holes with twist bits and hole saws belong to the DCD806. Fasteners belong to the DCF845, and the hex chuck makes bit changes quick, because a bit slides in and locks with one hand.
The hex chuck also limits the DCF845 to hex-shank bits, which is the standard for impact-rated driver bits. Those bits are built for the hits, and they last longer than ordinary screwdriver bits do on an impact driver.
Size, light and battery life
The DCF845 is compact enough that size has never been a problem. Atomic mini models exist for people who want the smallest possible head, and Pro Tool Reviews notes the DCF845 is not DeWalt’s most compact driver. In practice, this XR unit slides between studs and into cabinet boxes without a hitch.

The 3-LED ring light is one of the best things about it. It blasts the shadows out of dark corners, inside cabinets and behind framing, and removes the need for a flashlight in the other hand.
Battery life is better than on the drill. Impact driver trigger pulls are short and sharp, so a 4Ah battery goes a lot further here than it does on a drill, and it carries a heavy day of work with room to spare. One reviewer on Toolstash says that battery life has always been a strength of DeWalt tools, and this driver is no exception. The same is true on this one.
Jams, cam-out and stripped heads
It has never jammed or locked up unexpectedly. The impacts kick in smoothly when resistance builds, and as long as firm pressure stays on the bit, it does not cam out or strip heads.
A different reviewer on Toolstash reports that it would occasionally get stuck. That has not happened here, across framing lumber, deck screws and lag bolts.

Pressure is the whole trick with any impact driver. A bit that is pushed straight into the screw seats fully, and the driver does the rest.
The belt clip
The one complaint is the same one that applies to the DCD806. The metal belt clip is flimsy. A sturdier clip would fix the only thing about the tool that falls short.
It would be bought again without hesitation, with a stronger clip as the only change. Anyone who wants maximum driving power in a light, compact body, whether a DIYer or a pro, will find it a good fit.
The kit makes the most sense for someone already on the DeWalt 20V platform, or starting on it. The driver and the drill share batteries and a charger, and every battery added later works across the whole shelf of tools. A homeowner in the middle of a renovation gets a driver for every fastener and a drill for every hole, and a pro gets a second set of tools that can stay in the truck as a backup.
Sources
- DeWalt DCF845P2 product page: https://www.dewalt.com/product/dcf845p2/20v-max-xr-3-speed-14-impact-driver-kit?tid=576856
- Pro Tool Reviews, DCF845 review: https://www.protoolreviews.com/dewalt-20v-max-xr-brushless-impact-driver-review
- Pro Tool Reviews, best DeWalt impact driver: https://www.protoolreviews.com/best-dewalt-impact-driver
- Toolstash, DCF845B review: https://toolstash.com/tools/S5uak7-20v-max-xr-3-speed-impact-driver-dcf845b
- Toolstash, DCF845P1 review: https://toolstash.com/tools/8nCbIH-20v-max-xr-brushless-cordless-3-speed-impact-driver-kit-dcf845p1
- YouTube comparison video, DCF840 vs DCF845: https://www.youtube.com/watch?v=knSbiy5-5v4
- Amazon listing, DCK250QQ2 kit: https://www.amazon.com/dp/B0FKKKVN7M
